We all get annoyed with poor WiFi connections that our services local provider provides us with but the problem is in fact that the poor connections are not fully their mistake either it is something to do with the location where your router is situated and the basic range of wifi router is 150 feet with all the agents such as solid walls, electrical devices or any other kind barrier inside your house.

Wifi extenders are the tiny device that assists you to get solid connections anywhere in your house or office. As we know that the wireless range extenders are molded in such a way that they can hold up wifi technology speed till 1.2Gbps and with a high-power dual-core processer that allows the wireless extension. With the wireless extender, you can perform and enjoy delay-free gaming experience from anywhere in your house with fast speed. The LED lights allow you to determine the best coverage suitable point at your desired location.

Rockspace Extender Solution

The companies came up with a solution as extenders, as they help the user to connect straight to the web UI where the client can make changes as they require by adding some parental control, can keep eye on system speed, also can keep the record who is connecting to your network. As the various devices are connected to your extender, each device will get better and increased network speed and it will also envelope more of its surroundings. Extenders are very practical and make use of a smart setup portal for the extender and getting it done to use in less time. You can also login to the extenders page to open the settings by the IP address 192. 168. 11 and can certainly check that the device is connected to the extender’s network.

Re.Rockspace Offline setup

re.rockspace.local is an offline portal that helps to install extender through online portal settings using IP 192. 168. 0. 254, connect your device to your extender’s network. While setting up the device one should know about the LED indicators, when the light is turned green it shows that the extender is powered up, when the light is blinking fast it means that the internet pack is transmitted or received, WPS means that the button is connected to the router.

WPS Setup

In WPS setup, to set up the extender, firstly you need to connect the plug into the electrical board and turn on your wireless extender, then wait for the LED to change its colour to green, then press the WPS button on the extender for about 7 seconds then the WPS LED will rapidly blink on both router and extender and the blinking is stable then you know that the extender and router are connected to each other.

For setting up your extender with web UI method, open any web browser and type https://re.rockspace.local in the address bar and press enter then create the login and security password to intensify the security on extender’s web page, the involuntary scan will show all the network that is available in your surroundings, select the name of your router and type the passcode to your router, then create your username and passcode for your extender and then click on the wireless connection manager on your device and enter your username and passcode, press on the continue button and finish your extender setup and find a new spot to place your extender so to avoid all the blockage and use it everywhere.

Rockspace activities control

To access and control all the activities you need to enter the default login on the extender’s box and open the web page and enter re.rockspace.local and connect your devices and enter the login details that your used for extender’s setup and click enter and you all set up to check and controls all the activities.

We all want our network to work efficiently and for that— upgrading the firmware of your extender is a must. You need to download the newest version of firmware from the official website and attach your device to _EXT network with any web browser open the site and click on advanced settings and select the firmware update option and select the latest version file that is already downloaded and press on upgrade and it will start upgrading. Then the extender will automatically reboot after the upgrades. Do not restart manually in the middle of the upgrade process.

Author's Bio: 

My name is Robert Williams. I am from USA.