6 Important Roofing Safety Tips Your Team Needs to Know

Working on a roof can be a daunting and dangerous task. The roofs of homes and commercial buildings aren't designed with foot traffic in mind, yet repairs and inspections require just that. Whether you are working on a new construction site or installing solar panels, safety should be your number one priority.

Using proper precautions and life-saving safety equipment can help you and your employees avoid common accidents while working on a roof.

General Roofing Safety Advice

Keep the Work Area Clear and Note Any Hazards

Make sure the work area is clean, organized and blocked off from any passersby. Note any potentially dangerous area within the work site, both on the roof and the ground, including power lines, unsafe access points, skylights or any spot on the roof that appears damaged.

You should also avoid working on a roof during extreme conditions. Rain, sleet or snow increase the risk for potential falls, while high temperatures can lead to heat exhaustion, stroke and cause damage to your equipment.

Strap in With a Harness

A roofing safety harness is part of an entire personal fall arrest system. It includes the harness, lanyard, rope-grab, rope and a roof anchor. Choose the appropriate harness and system for your job-site. Work conditions can vary, and harnesses are not one-size-fits-all.

Rooftop Safety Pro Tip: Take the height of the building you are working on into consideration. Depending on the height of the structure, you may need to use retractable lanyards instead of fixed lengths.

Set Up and Climb Carefully

There are many safety guidelines for ladders, and the U.S. Department of Labor's Occupational Safety and Health Administration lists them out completely. These basics are especially important to keep in mind:

1. Always maintain 3-point contact on the ladder.
2. Be sure that all locks on an extension ladder are engaged.
3. The proper angle for a ladder is to place its base a quarter of the working length from the wall.

Work in the Heat and Take a Break in the Shade

Especially during peak summer months, a roof is an effective heat trap. Dark roofs absorb and radiate heat back towards workers which can cause heat exhaustion. Provide a tent or shaded area for workers to take a break from the sun.

Make Sure to Stay Hydrated

Rather than drinking large amounts of water all at once, ensure your employees drink smaller amounts of water throughout the work day. Provide a water cooler or water bottles for employees to drink during their breaks to cool off.

Wear Appropriate Protection

Proper protective wear includes suitable footwear, hats, sunglasses, pants and long-sleeve shirts.